Problems with Full version

oobob · 12-07-2001, 10:27 PM

Hey up - was wondering whether anyone else had observed the same problem

Got the trial version with WinXP - Loved it!

But with the full version I get appaling refresh rates!

Got Geforce 2 GTS DDR 64MB, Athlon 1Gb, 256Mb RAM

Any ideas

Cheers

feldon34 · 12-07-2001, 11:05 PM

60 Hz refresh? or a limited number of choppy frames per second? Can you clarify? (we have fixes for both!)

oobob · 12-08-2001, 02:34 AM

Dunno - before it was nice and smooth but now it is jerky and sluggish

Have tried changing the colour quality from 32 to 16 bit but that has had no effect!

Current Refresh rate should be 85Hz according to Windows display properties

Any ideas

pipeta · 12-08-2001, 06:02 AM

I think that would mean you have a limited number of choppy frames per second.

feldon34 · 12-08-2001, 10:40 AM

Run the Aquarium and press the S key. It should display something similar (if working properly):
1024x768x16 Direct3D HAL 32.92fps

and
1024x768x32 RGB Emulation 2.8fps
if there is something wrong.

The drivers that Microsoft chose for Windows XP are very poor. What 3D card do you have?

procerus · 12-08-2001, 12:31 PM

Hi oobob,

have you tried different nVidia Detonator drivers? I'm not running XP. But on Windows 98SE I get over 100fps at 1600x1200 with the 21.83 reference drivers. If I install the latest 23.11 reference drivers I get less than 10fps.

I think I preferred nVidia's previous method of beta-testing drivers by leaking them to this current system of releasing them as "reference drivers" bugs'n'all!

oobob · 12-08-2001, 12:42 PM

OK now this is wierd - its all choppy and jerky - but when I press S to get my FPS it goes nice and smooth and I get about 75 fps @ 1152x864x16

When I press S again to get rid of message it goes choppy again!

Currently using 21.83 NVidia drivers

feldon34 · 12-08-2001, 12:43 PM

Well, that's where we're headed. If the problem is as I describe, it's time to get the recommended Windows XP driver from my website:

https://www.feldoncentral.com/Sachs/help.html

pipeta · 12-08-2001, 02:11 PM

Why does a Direct2D message has an effect on the Direct3D? Is it a problem with the integrated version of Direct2D&3D in DX6?

feldon34 · 12-08-2001, 04:13 PM

Ok, solution is to press Ctrl-S. Then press SPACE bar and then click EXIT.

You should be good to go and never have to do the "Ctrl-S" thing again (pressing SPACE and EXIT saves that setting).

This is basically an nVidia card stabilizer that Jim put into the Aquarium.

It's documented in the Frequently Asked Questions, number 4.2.

12-07-2001, 10:27 PM	#1
oobob Registered Join Date: Dec 2001 Posts: 3	Problems with Full version Hey up - was wondering whether anyone else had observed the same problem Got the trial version with WinXP - Loved it! But with the full version I get appaling refresh rates! Got Geforce 2 GTS DDR 64MB, Athlon 1Gb, 256Mb RAM Any ideas Cheers

12-07-2001, 11:05 PM	#2
feldon34 Forum Administrator Join Date: Dec 2000 Location: Rock Hill, SC Posts: 10,947	60 Hz refresh? or a limited number of choppy frames per second? Can you clarify? (we have fixes for both!) "Journalism is printing what someone else does not want printed. Everything else is public relations." - George Orwell "If voting changed anything, they'd make it illegal." - Emma Goldman

12-08-2001, 10:40 AM	#5
feldon34 Forum Administrator Join Date: Dec 2000 Location: Rock Hill, SC Posts: 10,947	Run the Aquarium and press the S key. It should display something similar (if working properly): 1024x768x16 Direct3D HAL 32.92fps and 1024x768x32 RGB Emulation 2.8fps if there is something wrong. The drivers that Microsoft chose for Windows XP are very poor. What 3D card do you have? "Journalism is printing what someone else does not want printed. Everything else is public relations." - George Orwell "If voting changed anything, they'd make it illegal." - Emma Goldman

12-08-2001, 12:43 PM	#8
feldon34 Forum Administrator Join Date: Dec 2000 Location: Rock Hill, SC Posts: 10,947	Well, that's where we're headed. If the problem is as I describe, it's time to get the recommended Windows XP driver from my website: https://www.feldoncentral.com/Sachs/help.html "Journalism is printing what someone else does not want printed. Everything else is public relations." - George Orwell "If voting changed anything, they'd make it illegal." - Emma Goldman

12-08-2001, 04:13 PM	#10
feldon34 Forum Administrator Join Date: Dec 2000 Location: Rock Hill, SC Posts: 10,947	Ok, solution is to press Ctrl-S. Then press SPACE bar and then click EXIT. You should be good to go and never have to do the "Ctrl-S" thing again (pressing SPACE and EXIT saves that setting). This is basically an nVidia card stabilizer that Jim put into the Aquarium. It's documented in the Frequently Asked Questions, number 4.2. "Journalism is printing what someone else does not want printed. Everything else is public relations." - George Orwell "If voting changed anything, they'd make it illegal." - Emma Goldman

12-08-2001, 02:34 AM	#3
oobob Registered Join Date: Dec 2001 Posts: 3	Dunno - before it was nice and smooth but now it is jerky and sluggish Have tried changing the colour quality from 32 to 16 bit but that has had no effect! Current Refresh rate should be 85Hz according to Windows display properties Any ideas

12-08-2001, 06:02 AM	#4
pipeta Royal Gramma Join Date: Nov 2001 Location: Israel Posts: 146	I think that would mean you have a limited number of choppy frames per second.

12-08-2001, 12:31 PM	#6
procerus Registered Join Date: Nov 2001 Location: Rampisham Posts: 9	Hi oobob, have you tried different nVidia Detonator drivers? I'm not running XP. But on Windows 98SE I get over 100fps at 1600x1200 with the 21.83 reference drivers. If I install the latest 23.11 reference drivers I get less than 10fps. I think I preferred nVidia's previous method of beta-testing drivers by leaking them to this current system of releasing them as "reference drivers" bugs'n'all!

12-08-2001, 12:42 PM	#7
oobob Registered Join Date: Dec 2001 Posts: 3	OK now this is wierd - its all choppy and jerky - but when I press S to get my FPS it goes nice and smooth and I get about 75 fps @ 1152x864x16 When I press S again to get rid of message it goes choppy again! Currently using 21.83 NVidia drivers

12-08-2001, 02:11 PM	#9
pipeta Royal Gramma Join Date: Nov 2001 Location: Israel Posts: 146	Why does a Direct2D message has an effect on the Direct3D? Is it a problem with the integrated version of Direct2D&3D in DX6?