Economize Video Memory? What is the trade off?

06-17-2003, 12:48 PM

When you select "Economize video memory" in the prefs for the screen saver, what, exactly, is it doing? What is the trade off, if any, for selecting this option?

I know you get a higer frame rate, but how does it do it and what are you giving up?

feldon34 · 06-17-2003, 01:12 PM

I believe the hardware Z-buffer goes away, so when fish turn, the fins can "pop" as they come from behind the body to the front of the body.

06-17-2003, 02:06 PM

I don't get it. In English please? :P

feldon34 · 06-17-2003, 07:41 PM

You asked for juicy details. If you want an explanation of all the stuff that is done to save RAM, it could take a few pages.

JimO'Connor · 06-17-2003, 08:38 PM

The z-buffer is hardware support for figuring out what polygons are rendered closest to the plane of the screen. Turning it off frees up video ram for other uses. On low memory video cards, turning it off can mean that hardware acceleration is available where it might not be otherwise. Turning it off also means that the last thing drawn to a particular pixel is what is viewed by the user even if it is "behind" something drawn earlier. Mac MA is highly optimized for running with the z-buffer off, but there are some conditions which can occur which are not something we can catch without restructuring the program pretty extensively.

The trade off is that sometimes there are transient visual anomolies which wouldn't occur with z-buffer on. Most people don't notice.

Jim Sachs · 06-17-2003, 10:22 PM

Surfer, you are asking for an English explanation of a problem that only exists in Programmerland, not in the real world.

As Jim O'Connor says, the Z-Buffer is used to decide if a pixel should be painted to the screen, or if there is already a pxel at that location which is closer to the viewer. The important thing is that it does this for each pixel, not just each polygon. A programmer can calculate which polygons happen to be closer at the moment, and render them last, but what about polygons which intersect each other? For example, the side fins of many of the fish are single triangles which pass into the body where they connect. With no Z-buffer, you have to render either the body last or the whole fin last, including the part which should be hidden inside the body. With the Z-buffer on, the pixels which are outside the body get rendered, but not the ones which are inside.

I do not condone the removal of the Z-buffer.

feldon34 · 06-18-2003, 06:48 AM

Originally posted by Jim Sachs
I do not condone the removal of the Z-buffer.

The Z-Buffer is still in some kind of memory-saving mode in the latest build of MA2 for Windows I think.

I'll have to check before I have to eat my words.

06-19-2003, 11:34 AM

Thanks for your responses, I appreciate it. Seems like I've gotten two opinions: "Mac MA is highly optimized for running without Z-Buffer so it's no big deal to turn it off," or "Don't turn off the Z-Buffer, period". Well, I've tried it both ways, and my ordinary Joe eyes cannot discern a difference whether it is on of off, it's looks great regardless, so I guess it doesn't matter either way.

Thanks!

06-19-2003, 11:39 AM

P.S.

I just didn't get what feldon27 meant when he said "so when fish turn, the fins can 'pop'..."

06-19-2003, 11:39 AM

P.S.

I just didn't get what feldon27 meant when he said "so when fish turn, the fins can 'pop'..."

Jim Sachs · 06-19-2003, 12:51 PM

He meant that when the program calculates other surrounding polygons to be farther away, the fins can suddenly be drawn on top of them.

feldon34 · 06-19-2003, 12:59 PM

The fins are separate objects from the fish.

In economize video memory mode (with the Z-Buffer off):

When the fish turns to go a different direction, if the body is overlapping the fin in any way, the fin is drawn behind the body.

If the fin is completely in front of the body, then the fin is drawn in front of the body.

The trouble is the transition between the two.

06-19-2003, 01:12 PM

I see, thank you very much.

Surfer

06-17-2003, 12:48 PM	#1
Surfer Guest Posts: n/a	Economize Video Memory? What is the trade off? When you select "Economize video memory" in the prefs for the screen saver, what, exactly, is it doing? What is the trade off, if any, for selecting this option? I know you get a higer frame rate, but how does it do it and what are you giving up?

06-17-2003, 01:12 PM	#2
feldon34 Forum Administrator Join Date: Dec 2000 Location: Rock Hill, SC Posts: 10,947	I believe the hardware Z-buffer goes away, so when fish turn, the fins can "pop" as they come from behind the body to the front of the body. "Journalism is printing what someone else does not want printed. Everything else is public relations." - George Orwell "If voting changed anything, they'd make it illegal." - Emma Goldman

06-17-2003, 07:41 PM	#4
feldon34 Forum Administrator Join Date: Dec 2000 Location: Rock Hill, SC Posts: 10,947	You asked for juicy details. If you want an explanation of all the stuff that is done to save RAM, it could take a few pages. "Journalism is printing what someone else does not want printed. Everything else is public relations." - George Orwell "If voting changed anything, they'd make it illegal." - Emma Goldman

06-17-2003, 08:38 PM	#5
JimO'Connor Mac Development Join Date: Jul 2002 Location: Kenai, Alaska Posts: 678	The z-buffer is hardware support for figuring out what polygons are rendered closest to the plane of the screen. Turning it off frees up video ram for other uses. On low memory video cards, turning it off can mean that hardware acceleration is available where it might not be otherwise. Turning it off also means that the last thing drawn to a particular pixel is what is viewed by the user even if it is "behind" something drawn earlier. Mac MA is highly optimized for running with the z-buffer off, but there are some conditions which can occur which are not something we can catch without restructuring the program pretty extensively. The trade off is that sometimes there are transient visual anomolies which wouldn't occur with z-buffer on. Most people don't notice. Jim O'Connor Order N Development

06-17-2003, 10:22 PM	#6
Jim Sachs Developer Join Date: Dec 2000 Location: Southern Oregon Posts: 9,816	Surfer, you are asking for an English explanation of a problem that only exists in Programmerland, not in the real world. As Jim O'Connor says, the Z-Buffer is used to decide if a pixel should be painted to the screen, or if there is already a pxel at that location which is closer to the viewer. The important thing is that it does this for each pixel, not just each polygon. A programmer can calculate which polygons happen to be closer at the moment, and render them last, but what about polygons which intersect each other? For example, the side fins of many of the fish are single triangles which pass into the body where they connect. With no Z-buffer, you have to render either the body last or the whole fin last, including the part which should be hidden inside the body. With the Z-buffer on, the pixels which are outside the body get rendered, but not the ones which are inside. I do not condone the removal of the Z-buffer. Jim Sachs Creator of SereneScreen Aquarium

06-17-2003, 02:06 PM	#3
Surfer Guest Posts: n/a	I don't get it. In English please? :P

06-18-2003, 06:48 AM	#7
feldon34 Forum Administrator Join Date: Dec 2000 Location: Rock Hill, SC Posts: 10,947	Originally posted by Jim Sachs I do not condone the removal of the Z-buffer. The Z-Buffer is still in some kind of memory-saving mode in the latest build of MA2 for Windows I think. I'll have to check before I have to eat my words. "Journalism is printing what someone else does not want printed. Everything else is public relations." - George Orwell "If voting changed anything, they'd make it illegal." - Emma Goldman

06-19-2003, 11:34 AM	#8
Surfer Guest Posts: n/a	Thanks for your responses, I appreciate it. Seems like I've gotten two opinions: "Mac MA is highly optimized for running without Z-Buffer so it's no big deal to turn it off," or "Don't turn off the Z-Buffer, period". Well, I've tried it both ways, and my ordinary Joe eyes cannot discern a difference whether it is on of off, it's looks great regardless, so I guess it doesn't matter either way. Thanks!

06-19-2003, 11:39 AM	#9
Unregistered Guest Posts: n/a	P.S. I just didn't get what feldon27 meant when he said "so when fish turn, the fins can 'pop'..."

06-19-2003, 12:51 PM	#11
Jim Sachs Developer Join Date: Dec 2000 Location: Southern Oregon Posts: 9,816	He meant that when the program calculates other surrounding polygons to be farther away, the fins can suddenly be drawn on top of them. Jim Sachs Creator of SereneScreen Aquarium

06-19-2003, 12:59 PM	#12
feldon34 Forum Administrator Join Date: Dec 2000 Location: Rock Hill, SC Posts: 10,947	The fins are separate objects from the fish. In economize video memory mode (with the Z-Buffer off): When the fish turns to go a different direction, if the body is overlapping the fin in any way, the fin is drawn behind the body. If the fin is completely in front of the body, then the fin is drawn in front of the body. The trouble is the transition between the two. "Journalism is printing what someone else does not want printed. Everything else is public relations." - George Orwell "If voting changed anything, they'd make it illegal." - Emma Goldman

06-19-2003, 01:12 PM	#13
Surfer Guest Posts: n/a	I see, thank you very much. Surfer