Inside: SereneScreen Fan Forum - View Single Post

JohnWho · 06-12-2010, 06:32 PM

Originally posted by Jim Sachs:

With pre-MA3 versions, the machine was allowed to run unfettered when Limit Frame Rate was off, and that's the way it will work here. In the early days, the program was used extensively as a bench-mark test for 3D hardware, (it was nicknamed Fishmark).

Default will be ON, with a limit of 90. Users are free to turn it off or adjust the limit up to 125. It's very likely that the new 3D stereovision cards will need to take control of the framerate, so I need to let them do their thing.

Slider goes from 30 to 120 now.

Default "On", limit "90" seems reasonable.

Will "CTRL-R" also now set to these settings?

06-12-2010, 06:32 PM	#12
JohnWho Registered Join Date: Sep 2009 Location: Tampa Bay Area, Florida Posts: 486	Originally posted by Jim Sachs: With pre-MA3 versions, the machine was allowed to run unfettered when Limit Frame Rate was off, and that's the way it will work here. In the early days, the program was used extensively as a bench-mark test for 3D hardware, (it was nicknamed Fishmark). Default will be ON, with a limit of 90. Users are free to turn it off or adjust the limit up to 125. It's very likely that the new 3D stereovision cards will need to take control of the framerate, so I need to let them do their thing. Slider goes from 30 to 120 now. Default "On", limit "90" seems reasonable. Will "CTRL-R" also now set to these settings? I know you think you understand what you thought I said, but I'm not sure you realize that what you heard is not what I meant!