Inside: SereneScreen Fan Forum

Inside: SereneScreen Fan Forum (https://www.feldoncentral.com/forums/index.php)
-   Marine Aquarium 3 for Windows (https://www.feldoncentral.com/forums/forumdisplay.php?f=46)
-   -   [Not a Bug] Could not find any compatible Direct3d devices (https://www.feldoncentral.com/forums/showthread.php?t=4598)

Highlander 11-18-2008 04:13 AM

Could not find any compatible Direct3d devices
 
With Beta 6 i get this error now

Could not find any compatible Direct3d devices

Before it was working fine

Im using a nvidia quadro fx 1700

cjmaddy 11-18-2008 04:55 AM

You could try re-installing DirectX, and re-booting.

... Or run dxdiag and make sure that Direct3D Acceleration is 'Enabled'.

Highlander 11-19-2008 01:56 AM

Reinstalled direct x but no result.

Every other screensaver is working ( like DA)

Highlander 11-19-2008 06:53 AM

hmmm the file MA3Beta.scr properties says it i a DWG TrueView Script file ??

cjmaddy 11-19-2008 08:26 AM

I'm not certain, but I think that means that DWG TrueView is controlling your .scr files.

It sounds like this could be the same problem as is caused by AutoCAD?

feldon34 11-19-2008 08:54 AM

Quote:

Associates with Windows filename extensions in various non-standard ways. For example, ".scr" (screen-saver) is associated with "AutoDesk DWG script" after installing this product.
Those fools at AutoCAD at it again, I see. Fix.

Edgar 11-19-2008 10:07 AM

Try applying this registry file.

Warning: This deletes the USER settings for MA3

This will clean the user settings that may be causing the failure so you can get it going again.

Another WARNING: You will lose all changes to the MA3.

Edit: If this fails, then right click on MA3Beta.scr and select configure and try to change the Display settings manually to a lower resolution.

Highlander 11-20-2008 02:54 AM

1 Attachment(s)
Thanks everyone but still no result.

i made a screenshot :


Weird it was working before (also with dwg viewer installed)

Edgar 11-20-2008 03:17 AM

Apply the Settings cleaner I posted below.
Copy MA3Beta.scr to MA3Beta.exe
Double click on MA3Beta.exe

See if that works.

Highlander 11-20-2008 06:26 AM

Quote:

Originally Posted by Edgar (Post 107695)
Apply the Settings cleaner I posted below.
Copy MA3Beta.scr to MA3Beta.exe
Double click on MA3Beta.exe

See if that works.

Nope not working

cjmaddy 11-20-2008 08:07 AM

Nothing seems to be working, does it! ... :(

When you ran dxdiag, did you also 'Test Direct3D'? - ie. The Display tab in dxdiag should state that 'Direct3D Acceleration is Enabled' This can be found in the 'DirectX Features' box. If so, try clicking on 'Test Direct3D' to ensure that the 3D acceleration is functioning properly.

If you are unfamiliar with dxdiag, this post describes the procedure well....
http://www.mp3car.com/vbulletin/stre...ces-error.html

If that is no help, and all else fails, I con only suggest re-installing your video card drivers. - If you do reinstall the drivers, be sure to also re-install DirectX again afterwards! - and then cold re-boot your computer, just to make sure.

..... Good luck!

Edgar 11-20-2008 10:03 AM

Do you still have access to the older versions?
Does any of the older versions still work?

Edit: You might have to change your computer time to test them, if you are willing.

Jav400 11-20-2008 10:55 AM

I keep all the older versions and the new ones as they come out located here.

You can always pull from there to test any versions as necessary.

Highlander 11-20-2008 12:18 PM

Thanks everyone , i will keep you guys informed

greetings from Belgium

Highlander 11-21-2008 02:43 AM

Im back and it is solved ! It was no bug in MA3

First i checked this "When you ran dxdiag, did you also 'Test Direct3D'? - ie. The Display tab in dxdiag should state that 'Direct3D Acceleration is Enabled' This can be found in the 'DirectX Features' box. If so, try clicking on 'Test Direct3D' to ensure that the 3D acceleration is functioning properly." but everything was fine.

But i had the feeling that my computer was slow so i checked with malwarebytes http://www.malwarebytes.org/

Malwarebytes found a trojan and removed it, afterwards MA3 runs like hell :)
Im always very carefull in what i download but yes i was infected :)

Very strange that malware could interfere with a screensaver?

Anyway thanks everyone for the help !

Jim Sachs 11-21-2008 11:03 AM

Thanks for following up on this. These types of reports are extremely valuable to us, as I'm sure someone else will have a similar experience.

CodeMonkey 12-29-2008 02:17 PM

I found another way to get this error I believe. I have the beta .scr file on my quicklaunch bar. I mistakenly double clicked it once (which starts the program twice) and the error box appeared. I believe the second instance had issues because of the first instance of the program. Maybe making the program a singleton makes sense?

Jim Sachs 12-29-2008 05:39 PM

It already has a mutex, which should preclude launching a second instance.

Voyager 03-09-2014 11:56 PM

:loco: I have had the Aquarium 3.2 up and running just fine. really enjoy it. I set background colors, working on both screens for many restarts, all good. Then bang.... 'Could not find any compatible Direct3d devices'! dxdiag indicates Direct3D Acceleration is enabled, DirectX version 11 and all video drivers are up to date. I tried uninstall and re-installed the program, re-installing Direct X and windows runtime, Malwarebytes has run scan and is clean. What happened?!? I'd like to try and disable then enable but Windows 7 Direct X Diagnostic tool doesn't have the option. Help! I want my Aquarium back!

Jim Sachs 03-14-2014 08:45 AM

Could a 'silent' update of either DirectX or the video drivers have changed something without you knowing about it? You mentioned having two screens. Do both of them use the same card and drivers?


All times are GMT -6. The time now is 07:37 PM.

Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.